Effect of oxygen exposure on the magnetic properties of ultrathin Co/Ge(1 1 1) films

Influences of oxygen exposure on the magnetic properties of Co/Ge(1 1 1) ultrathin films have been investigated by surface magneto-optic Kerr effect technique. As the oxygen exposure increases on Co/Ge(1 1 1) films, their magnetic properties could be modified. As an example for 15 ML Co/Ge(1 1 1) films, the coercivity increases from 730 to 920 Oe and the remanence Kerr intensity is reduced for 500 Langmuir (L) of oxygen exposure. Corresponding compositions analyzed by Auger electron spectroscopy measurement shows that the amount of oxygen on the surface layers increases with increasing the oxygen exposure time. Oxygen distributes on the topmost layers of the film. The adsorbed oxygen influences the electronic density of states of Co and results in the changes of the magnetic properties. Besides, the appearance of O/Co/Ge interface could modify the stress anisotropy, and as a result the coercivity of ultrathin Co/Ge(1 1 1) film is enhanced.     

Observation of spontaneous pattern with six-fold symmetry in disk-shaped ZnO complex microstructures

Using a simple vapor phase transport technique, we have fabricated unique complex disk-shaped ZnO microstructures comprising a small disk coaxially grown on a large one and observed spatially perfect six-fold symmetric patterns. The observed results can be explained based on the spontaneous nanoindentation (NI) effect under the geometric constraints and the explanation can be extended to fathom the growth mechanism of other highly symmetrical ZnO nanostructures. Our results indicate that NI not only can elucidate the mechanical properties of surfaces and thin films but also is an effective approach to fabricate ordered nanostructures with high precision on the location of the building blocks. PACS 81.16.Rf; 81.07.-b; 81.05.Dz     

Effect of nitrogen surface doping on the work function and field emission of hydrogenated amorphous carbon films

The effect of nitrogen surface doping on the electron field emission characteristics of hydrogenated amorphous carbon films was studied. It was found that the emission threshold electric field decreased after nitrogen surface doping which indicated the reduction of the emission barrier at the film surface. It was demonstrated that this improvement arose from the decrease of the effective work function due to the formation of a dipole layer induced by chemical termination and chemical structural change on the film surface. PACS 52.75.Xx; 73.30 +y; 73.61.Jc     

An experimental study of dynamic tensile properties of glass fiber at low-temperatures

Tensile impact experiments of EC8.0−24×7 glass fiber bundles at different low temperaturesT(14°C, −40°C and −10°C) and strain rates ɛ were carried out, and complete stress-strain curves were obtained. Within the range of the experiment temperatures and strain rates, it is found that the initial modulusE, the ultimate strength σ_max and the unstable strain ɛ _b of the glass fiber bundles all increase with ɛ at an identicalT. At an identical ɛ, with the decrease ofT, E and σ_max increase; but ɛ _b increases when 10°C>T>−40°C and decreases when −40°C>T>−100°C. The strain-rate- and temperature-dependent bimodal Weibull statistical constitutive theory was adopted for the statistical analysis of the experimental results, and the Weibull parameters of single fiber were obtained. The results show that the bimodal Weibull distribution function is suitable to represent the strength distribution of the glass fiber at low temperature and different strain rates. The differences in the mechanical properties between EC8.0−24×7 and EC5.5−12 ×14 glass fiber bundles were also discussed. Project supported by the National Natural Science Foundation of China (No. 19772058).     

全固态多波长飞秒脉冲激光系统

利用棱镜对引进频谱空间啁啾来补偿飞秒脉冲激光二次谐波产生中的相位失配,提高了倍频效率建立了一套全固态、多波长(1065nm, 532nm,823.1nm, 402nm)飞秒脉冲激光系统自制的Nd:YVO4激光器输出532nm绿光激光,最高平均功率可达5.6W当用2.5W绿光激光泵浦时,从自制的钛宝石激光器及经BBO倍频可分别输出中心波长为823.1nm和402nm,平均功率300mW和73mW,谱宽32.3nm和5.1nm,脉宽22fs和33.3fs、重复率108MHz的近红外和蓝光激光整个系统具有结构紧凑、倍频效率高、运行稳定的特点.     

A new monitoring system of cultured myocardial cell motion: effect of pilose antler extract and cardioactive agents on spontaneous beating of myocardial cell sheets

Effects of various cardioactive agents and a water extract of the pilose antler of Cervus nippon var. mantchuricus on periodic beating of cultured myocardial cell sheets were examined by using an image analyzing system. Norepinephrine increased the beating rate and the beating amplitude, whereas digoxin and forskolin enlarged only the beating amplitude. Verapamil and propranolol decreased both the beating rate and the beating amplitude. The water extract of the pilose antler showed no remarkable effects in a standard medium (2.1 mM Ca2+). However, it significantly increased the beating amplitude when the beating was suppressed by replacement with a low calcium medium (0.5 mM Ca2+). A similar effect was found for 70% ethanol-soluble and -insoluble fractions of the extract.     

量子测量对三维光子晶体中Λ型原子动力学性质的影响

讨论了量子测量对各向异性光子晶体中Λ型激发态原子衰减的影响，主要包括衰减的抑制和加速效应.研究发现，这样的量子测量效应不仅与原子共振频率相对于光子晶体带边的位置有关，还与量子测量本身的频率大小相关.由于各向异性光子晶体的影响，较小频率的量子测量也能得到抑制衰减的效应. 关键词： 量子测量 量子Zeno 和 反Zeno效应 光子晶体     

Large time behavior of the solutions to the Boltzmann equation with specular reflective boundary condition

In this paper a half space problem for the one-dimensional Boltzmann equation with specular reflective boundary condition is investigated. It is shown that the solution of the Boltzmann equation time-asymptotically converges to a global Maxwellian under some initial conditions. Furthermore, a time-decay rate is also obtained.     

Artificial time integration

Many recent algorithmic approaches involve the construction of a differential equation model for computational purposes, typically by introducing an artificial time variable. The actual computational model involves a discretization of the now time-dependent differential system, usually employing forward Euler. The resulting dynamics of such an algorithm is then a discrete dynamics, and it is expected to be “close enough” to the dynamics of the continuous system (which is typically easier to analyze) provided that small – hence many – time steps, or iterations, are taken. Indeed, recent papers in inverse problems and image processing routinely report results requiring thousands of iterations to converge. This makes one wonder if and how the computational modeling process can be improved to better reflect the actual properties sought. In this article we elaborate on several problem instances that illustrate the above observations. Algorithms may often lend themselves to a dual interpretation, in terms of a simply discretized differential equation with artificial time and in terms of a simple optimization algorithm; such a dual interpretation can be advantageous. We show how a broader computational modeling approach may possibly lead to algorithms with improved efficiency. AMS subject classification (2000)  65L05, 65M32, 65N21, 65N22, 65D18